SEG Fabric

This is the interchangeable part of a fabric display system. The graphic prints deep, even color on 6oz tension polyester, the silicone edge hides the hardware for a frameless face, and the whole panel rolls down small for travel and storage. Want to see how it fits alongside the frames it goes into? Browse the full range on SEG Displays, or stay here and build your fabric from the choices below.

Pricing starts at $69 for a SEG fabric graphic, UV-printed in-house on 6oz polyester and cut to your size. You can order from 1 to 100 units in a single job, and every order earns 4OVER4 loyalty coins you can apply at checkout for up to 10% off. Set your options below and the live configurator shows the exact price before you commit.

What Is SEG Fabric?

SEG fabric is the printed textile face of a silicone edge graphic display. It is UV-printed on 6oz polyester with a 10mm silicone strip, called a keder, sewn around every edge. That strip presses into a groove on a SEG frame or light box and pulls the fabric drum-tight, so the graphic sits flat and frameless. It is cut to any size and made for either a non-lit or a backlit frame.

Think of SEG fabric as the interchangeable poster for a fabric display system. SEG stands for silicone edge graphic. A thin silicone keder is sewn around the edge of the print and pressed into a channel on the frame, which stretches the fabric taut and hides the hardware for a clean, seamless face.

4OVER4 UV-prints the graphic in-house on 6oz tension polyester and builds it to your exact size, so the panel you receive matches the file you sent and the frame you already own. When the message changes, you swap the fabric, not the whole display. If you still need the frame itself, the SEG Displays pair the hardware with a first graphic, and this fabric is the replacement face for the ones you already run.

What Material Is It Printed On?

4OVER4 prints SEG fabric on one material, 6oz tension polyester with a sewn-in 10mm silicone keder. The keder is the silicone edge strip that locks the graphic into the frame. The fabric is UV-printed, cut to any size you need, and chosen because it holds color and stretches wrinkle-free.

The graphic runs on 6oz tension polyester, a dye-friendly fabric that shows deep, even color and packs down small for travel. Around every edge, a 10mm silicone keder is sewn in. That is the silicone strip that seats into the frame groove and pulls the fabric tight, so the finished face is flat, seamless, and free of the ripples you get with clip frames.

This is the one material 4OVER4 runs for SEG fabric, UV-printed and cut to any size, because it survives repeated setup and teardown and still snaps back clean. The full spec, from the default size to file types and turnaround, is laid out below exactly the way the live configurator presents it.

Non-Lit or Backlit: Which Fabric Do You Pick?

SEG fabric comes in two types at 4OVER4, Non-Lit and Backlit. Non-Lit fabric suits a standard SEG frame lit from the front or the room. Backlit fabric is made for a light box, where illumination passes through the print from behind. You choose the type in the live configurator to match the frame you already own.

The one choice that matters most here is the fabric type. Pick Non-Lit when your graphic goes into a standard SEG frame that reads under room or spotlighting, the common case for booth walls and retail displays. Pick Backlit when the fabric seats into a light box and the illumination comes through the print from behind, which needs a fabric tuned to glow evenly instead of washing out. Matching the fabric to your frame is what keeps the color right, so set the type to match the hardware you have and the configurator prices it with your pick.

How Much Does SEG Fabric Cost?

SEG fabric starts at $69 at 4OVER4, UV-printed in-house and built to your size. You can order from 1 to 100 units in a single job, and every order earns 4OVER4 loyalty coins worth up to 10% off the order total. Your size, fabric type, and turnaround set the final price, and the live configurator shows the exact number before you commit.

The starting price is $69 for a SEG fabric graphic, printed on 6oz polyester and cut to your dimensions. You can order anywhere from 1 to 100 units in one go, handy when you are refreshing more than one frame or keeping a spare graphic on hand. A larger size, a backlit fabric, or a faster turnaround adjust the total, and the configurator shows every change before you order. Every order also earns 4OVER4 loyalty coins that you can apply at checkout for up to 10% off, worth about $6.90 on a $69 order.

How Does It Compare to the SEG Family?

SEG fabric is the value pick when you already own the hardware and just need a fresh printed face, but it is not the only move in the range. If you are weighing a full display, a lit version, or a packable popup, it helps to see the trade-off in plain numbers. The chart below lines up SEG fabric against its closest siblings, so you can compare the starting price on each before you choose. Then browse the SEG Displays for the frame with a graphic, the SEG Backlit Displays for a lit light box, or the SEG Backlit Popup Displays for a lit version that packs down for travel.

How Fast Can You Get SEG Fabric?

Standard production for SEG fabric at 4OVER4 is 3 business days, with 2-day, Next-Day and Same-Day rush available. Order by the daily cutoff and a same-day job ships that afternoon from the New York facility. You can also choose Straight To Production or a Free Online Proof before printing, and upload artwork as PDF, JPG, or PNG.

Standard turnaround is 3 business days, which keeps the price lowest. When a show sneaks up, you can move to 2-day, Next-Day, or Same-Day production, and order by the cutoff to have a same-day job leave the New York plant that afternoon. 99.8% of 4OVER4 orders arrive on time and 82% ship early, so a firm booth date is not a gamble. Need it in a hurry? Our Same Day Printing keeps you covered.

Before it prints, choose Straight To Production to save a step, or request a Free Online Proof to check your layout first. Upload your artwork as a print-ready PDF, JPG, or PNG.

When Do You Order Replacement SEG Fabric?

SEG fabric is the graphic you order when you already own a frame or light box and want to change the message. It works for seasonal campaign swaps, refreshed trade-show branding, and spare graphics kept on hand. Because it is cut to any size and made for non-lit or backlit frames, it fits the display system you already run.

The whole point of a silicone edge graphic system is that the fabric is interchangeable. You buy the frame or light box once, then order fresh SEG fabric whenever the campaign, the season, or the branding changes, and the old panel rolls down to almost nothing for storage. Retailers swap in a new hero product, exhibitors refresh a booth between shows, and offices update a lobby feature without touching the hardware. Order it in any size to match the frame you own, pick non-lit or backlit to match the lighting, and a new face snaps in wrinkle-free.

See the Rest of Our Displays

SEG fabric is one stop in a much larger lineup, and you can scan the full print product range any time. If a complete frame, a lit light box, or a packable popup would serve you better, the rest of the family is one tap away on the SEG Displays page. Each option shows its own starting price and links straight to its product page, so finding the right fit takes seconds.

Print Your SEG Fabric Today

At 4OVER4.COM, quality comes first, and it is backed by a satisfaction guarantee and 25+ years of printing since 1999. Whatever frame it goes into, non-lit or backlit, this SEG fabric is built to snap in wrinkle-free and hold color show after show. Need it before a launch or an exhibition? Our Same-Day production keeps you covered. Print your SEG fabric today.