Dry Erase Signicade

What Is a Dry Erase Signicade?

A dry erase signicade is a portable A-frame sidewalk sign. It pairs a 24" x 36" adhesive vinyl print with a 25" x 45" white plastic frame and a Dry Erase Lamination finish, so your printed branding stays fixed while a marker-friendly surface lets you change the message by hand. It prints on one or both sides and starts at $185.63 for one sign.

Picture the A-frame sign that stands outside a cafe or a shop entrance. The dry erase signicade is that sign, with one upgrade that changes how you use it. The printed vinyl carries your logo, colors, and layout, the parts that never change. Over that print sits a dry erase surface, so the daily message, a special, a price, an arrow, a set of hours, gets written on by hand and wiped off at close. You buy the sign once and rewrite it every morning instead of ordering a fresh print each week. If you want the same frame without the writable surface, the Signicade A-Frames cover that, and the dry erase version sits right beside it as the one you update yourself.

How Does the Dry Erase Surface Work?

The dry erase signicade is finished with a Dry Erase Lamination applied over the printed adhesive vinyl. You write on that surface with a standard dry-erase marker and wipe it clean with a cloth, so the same sign carries a new message each day without reprinting. The printed branding underneath is protected by the lamination and stays put through daily use.

The lamination is the whole point. It seals the print so weather and handling do not wear it down, and it gives you a smooth top layer that behaves like a whiteboard. Grab a dry-erase marker, write the soup of the day or a 20% off line, and it wipes away clean when the message changes. Because the branding is printed underneath and the writing lives on top, the two never fight each other. Your logo holds its place while the offer turns over as often as you like. That is a sign you rework in seconds rather than reorder in days.

What Size Is It, and How Is the Frame Built?

The dry erase signicade prints at 24" x 36" on adhesive vinyl, mounted in a 25" x 45" white plastic A-frame. The frame folds flat to carry and opens into a stable two-sided stand sized for sidewalks, entryways, and event floors. The 24" x 36" panel is the finished print area you design to.

The print panel is 24" x 36", a portrait format tall enough to read from across a sidewalk and wide enough for a headline plus a written line or two. It seats inside a 25" x 45" white plastic frame, so the plastic border frames the graphic cleanly. The A-frame shape does the standing for you: it opens into a stable triangle on the ground and folds flat when you bring it in at night or move it to the next spot. White plastic keeps it light to carry and easy to wipe down, and it holds its footing on a busy walkway. Everything you can set, the size, the frame, the finish, and the print sides, is grouped below exactly the way the live configurator lists it.

How Much Does a Dry Erase Signicade Cost?

A dry erase signicade starts at $185.63 for one sign, and the per-sign cost drops when you order a set, so a cheaper sign really comes down to how many doors you are outfitting. A set of 5 lands at $763.37, which works out to roughly $152.67 a sign, the lowest per-sign rate on the ladder, and 10 signs total $1,646.47. So how many do you actually need? Set your count below and watch both the order total and the true per-sign cost update live, then find the point where one more sign barely moves the budget.

Can You Print One Side or Both Sides?

Where the sign lives decides this one. The dry erase signicade prints one side only, both sides with the same image, or both sides with two different images. Against a wall or in a doorway that people only pass from one direction, one-sided printing keeps the cost down. On an open sidewalk where foot traffic comes from both ways, print both sides so nobody walks past a blank back.

You can run the same image on both faces for a consistent look, or two different images when each side faces a different audience, say a special one way and directions the other. Pair a two-sided print with the writable surface and you get two boards to update instead of one. For a version built to hold up to harsher outdoor light, the Reflective Signicade A-Frame uses a reflective face, and it sits in the same A-frame family.

How Fast Can You Get It, and Where Do People Use It?

Standard production for the dry erase signicade is 4 business days, so plan the order about a week ahead of the day you want the sign on the sidewalk. Before it prints you get a choice: send your file straight to production to save time, or request a free online proof and check the layout on screen first. Artwork comes in as a print-ready PDF, JPG, or PNG.

As for where it earns its keep, this is the sign for anyone whose message changes daily. Cafes post the day's specials, salons show walk-in availability, retailers flag a sale, and real estate agents point toward an open house. The print carries the brand, the marker carries the moment. For a heavier-duty build in the same shape, the Signicade Deluxe A-Frames step up the frame, and you can see every sidewalk option on Sidewalk Signs Printing.

How Does It Compare to the Other A-Frames?

The dry erase signicade is the pick when your message changes every day, but it is not your only move. If you are weighing a plain-print Signicade, a reflective face, or a heavier deluxe frame, it helps to see the trade-off in plain numbers. The chart below lines the dry erase signicade up against its closest siblings so you can compare the starting price on each before you choose.

See the Rest of Our Signs

The dry erase signicade is one stop in a much larger sign lineup, and you can scan the full print product range any time. If a plain Signicade, a reflective face, or a heavier deluxe frame would serve you better, the rest of the family is one tap away. Each option shows its own starting price and links straight to its product page, so finding the right fit takes seconds.

Print Your Dry Erase Signicade Today

At 4OVER4.COM, quality comes first, and it is backed by a satisfaction guarantee and 25+ years of printing since 1999. Whatever you decide on the print sides and the setup, this sign is built to stand on a busy walkway, take a daily rewrite, and keep your branding sharp underneath. Print your dry erase signicade today, and hand yourself a sign you update with a marker instead of a new order.