What is an easel back for a table top sign? An easel back is a folding support attached to the back of a printed piece that lets it stand upright on its own, no separate stand required… Read answer What material should I use to print a large rigid sign or display piece that won't bend? For a large sign or display that needs to stay flat and rigid, 3/16" foam core is an excellent choice. Read answer What alternatives to plexiglass signs are available for retail displays? Plexiglass gives a premium, glass-like look, but several substrates deliver retail-ready signage at a lower cost. Read answer How do I assemble a telescopic banner stand? A telescopic banner stand goes together with a few pole sections, a base, and crossbars that hold the banner taut. Read answer How much of a retractable banner will be hidden inside the stand? A small margin of a retractable banner is always concealed by the hardware, so you want to keep critical content away from the very top and … Read answer What's the difference between single-sided and double-sided retractable banner stands? What's the difference between single-sided and double-sided retractable banner stands? The main difference comes down to how many print face… Read answer What's the difference between vinyl and fabric step-and-repeat banners? Which is more durable? Both materials make a great backdrop, but they behave differently over repeated use. Read answer What is the difference between a pop-up display and a step-and-repeat banner? A pop-up display and a step-and-repeat banner are two different products, though there is useful overlap between them. Read answer How should I handle a banner stand to prevent it from coming undone? Budget banner stands last longest when the print is handled gently during setup and takedown. Read answer How should I clean and store fabric banners? Fabric banners keep their look for years with light, regular care and proper storage. Cleaning: wipe or wash with warm water on a regular ba… Read answer How should I handle a retractable banner to avoid damage? Retractable banners rely on a spring mechanism, so gentle handling is what keeps them working smoothly. Read answer What should I know about seams and live areas when designing large banners? Very large banners like step and repeat backdrops are printed in panels, so the layout includes seams and end caps you should design around. Read answer What bleed should I include on my foamcore sign file? Bleed is the extra artwork you extend past the final trim line so the ink runs all the way to the edge with no white slivers after cutting. Read answer What bleed allowance should I add to my design file for retractable banner stands? Add 1/8 inch (0.125") of bleed on all four sides of your retractable banner design. Read answer What file resolution (DPI) do I need for banners? What file resolution (DPI) do I need for banners? Banner files should be built at 300 DPI at the final print size. Read answer How should I specify grommet placement on mesh banners? To get grommets exactly where you want them on a mesh banner, spell out the placement in writing and with a simple diagram when you place th… Read answer What is card stock paper weight measured in? What is card stock paper weight measured in? Card stock weight is measured in pounds and shown with the pound sign (#). Read answer My banner arrived with creases and wrinkles. How can I remove them? Banners ship rolled to protect them, so light creases or wrinkles from storage are normal and usually relax on their own with a little warmt… Read answer Are feather flags single-sided or double-sided? Feather flags come in both single-sided and double-sided constructions, and which one you need depends on where the flag will be seen from a… Read answer What are more affordable alternatives to plexiglass signs? Plexiglass (acrylic) signs look premium but get expensive fast as size and customization grow. Read answer What's the best material to use for an A-frame sign if I already have the frame? If you already own the A-frame and only need a new insert, the material has to be rigid enough to sit in the frame channel but light enough … Read answer How do I reattach or fix a banner that's come loose from its clamp frame hardware? A banner that has slipped out of its clamp or frame hardware can almost always be reseated at home in a few minutes. Read answer What should I include on an outdoor banner to make it more durable? A longer-lasting outdoor banner is mostly about the right material and reinforced edges, plus a few tweaks for windy spots. Read answer What should I know about mesh banners and wrinkles? Mesh banners are made from a perforated vinyl that lets wind pass straight through, which is exactly why they hold up so well on fences and … Read answer
Didn't find your answer?
Our team replies within 24 hours.
