SEG Fabric

This is the interchangeable part of a fabric display system. The graphic prints deep, even color on 6oz tension polyester, the silicone edge hides the hardware for a frameless face, and the whole panel rolls down small for travel and storage. Want to see how it fits alongside the frames it goes into? Browse the full range on SEG Displays, or stay here and build your fabric from the choices below.

Pricing starts at $69 for a SEG fabric graphic, UV-printed in-house on 6oz polyester and cut to your size. You can order from 1 to 100 units in a single job, and every order earns 4OVER4 loyalty coins you can apply at checkout for up to 10% off. Set your options below and the live configurator shows the exact price before you commit.

What Is SEG Fabric?

SEG fabric is the printed textile face of a silicone edge graphic display. It is UV-printed on 6oz polyester with a 10mm silicone strip, called a keder, sewn around every edge. That strip presses into a groove on a SEG frame or light box and pulls the fabric drum-tight, so the graphic sits flat and frameless. It is cut to any size and made for either a non-lit or a backlit frame.

Think of SEG fabric as the interchangeable poster for a fabric display system. SEG stands for silicone edge graphic. A thin silicone keder is sewn around the edge of the print and pressed into a channel on the frame, which stretches the fabric taut and hides the hardware for a clean, seamless face.

4OVER4 UV-prints the graphic in-house on 6oz tension polyester and builds it to your exact size, so the panel you receive matches the file you sent and the frame you already own. When the message changes, you swap the fabric, not the whole display. If you still need the frame itself, the SEG Displays pair the hardware with a first graphic, and this fabric is the replacement face for the ones you already run.

How a silicone edge graphic actually attaches

SEG stands for silicone edge graphic, and the name describes the attachment rather than the print. Three parts do the work.

1. The keder. A 10mm silicone strip sewn around the full perimeter of the printed fabric. It is a thin flexible bead, not a rigid rail, so it bends with the fabric edge.
2. The channel. The aluminium frame or light box carries a narrow groove cut around its inside face, sized to grip that bead.
3. The push fit. You feed the keder into the groove by hand, starting at a corner and working around the frame. The last stretch pulls the fabric drum tight, and that tension is what takes every wrinkle out of the face.

Because the bead sits down inside the groove, nothing overlaps the front of the graphic. No frame lip, no clamp bar, no printed border, which is where the frameless edge to edge look comes from. It also means the face comes out as easily as it went in, so one frame carries a new message every time you print one.

What Material Is It Printed On?

4OVER4 prints SEG fabric on one material, 6oz tension polyester with a sewn-in 10mm silicone keder. The keder is the silicone edge strip that locks the graphic into the frame. The fabric is UV-printed, cut to any size you need, and chosen because it holds color and stretches wrinkle-free.

The graphic runs on 6oz tension polyester, a dye-friendly fabric that shows deep, even color and packs down small for travel. Around every edge, a 10mm silicone keder is sewn in. That is the silicone strip that seats into the frame groove and pulls the fabric tight, so the finished face is flat, seamless, and free of the ripples you get with clip frames.

This is the one material 4OVER4 runs for SEG fabric, UV-printed and cut to any size, because it survives repeated setup and teardown and still snaps back clean. The full spec, from the default size to file types and turnaround, is laid out below exactly the way the live configurator presents it.

Silicone Edge Graphics Specifications

Measure the frame rather than the old graphic, and measure to the outside of the channel. A face cut to the visible opening will not have enough material to reach the groove, and one cut oversize bags in the middle instead of pulling tight.

Non-Lit or Backlit: Which Fabric Do You Pick?

SEG fabric comes in two types at 4OVER4, Non-Lit and Backlit. Non-Lit fabric suits a standard SEG frame lit from the front or the room. Backlit fabric is made for a light box, where illumination passes through the print from behind. You choose the type in the live configurator to match the frame you already own.

The one choice that matters most here is the fabric type. Pick Non-Lit when your graphic goes into a standard SEG frame that reads under room or spotlighting, the common case for booth walls and retail displays. Pick Backlit when the fabric seats into a light box and the illumination comes through the print from behind, which needs a fabric tuned to glow evenly instead of washing out. Matching the fabric to your frame is what keeps the color right, so set the type to match the hardware you have and the configurator prices it with your pick.

The one line rule for Non-Lit and Backlit

Light in front of the graphic, order Non-Lit. Booth walls, retail wall frames, lobby panels, anything hanging in room light or under a spot. The fabric is built to hold color under light that falls onto the face.

Light behind the graphic, order Backlit. A light box with lamps or an LED panel inside the frame. The fabric is built to pass that light through evenly so the panel glows as one surface instead of showing hot spots.

The rule of thumb, applied without calling anyone: if the frame plugs into power, you want Backlit. If it does not, you want Non-Lit. Putting a Non-Lit face on a light box is the common mistake, and it shows up as a dull panel with the lamps outlined through the fabric.

How Much Does SEG Fabric Cost?

SEG fabric starts at $69 at 4OVER4, UV-printed in-house and built to your size. You can order from 1 to 100 units in a single job, and every order earns 4OVER4 loyalty coins worth up to 10% off the order total. Your size, fabric type, and turnaround set the final price, and the live configurator shows the exact number before you commit.

The starting price is $69 for a SEG fabric graphic, printed on 6oz polyester and cut to your dimensions. You can order anywhere from 1 to 100 units in one go, handy when you are refreshing more than one frame or keeping a spare graphic on hand. A larger size, a backlit fabric, or a faster turnaround adjust the total, and the configurator shows every change before you order. Every order also earns 4OVER4 loyalty coins that you can apply at checkout for up to 10% off, worth about $6.90 on a $69 order.

How Does It Compare to the SEG Family?

SEG fabric is the value pick when you already own the hardware and just need a fresh printed face, but it is not the only move in the range. If you are weighing a full display, a lit version, or a packable popup, it helps to see the trade-off in plain numbers. The chart below lines up SEG fabric against its closest siblings, so you can compare the starting price on each before you choose. Then browse the SEG Displays for the frame with a graphic, the SEG Backlit Displays for a lit light box, or the SEG Backlit Popup Displays for a lit version that packs down for travel.

How Fast Can You Get SEG Fabric?

Standard production for SEG fabric at 4OVER4 is 3 business days, with 2-day, Next-Day and Same-Day rush available. Order by the daily cutoff and a same-day job ships that afternoon from the New York facility. You can also choose Straight To Production or a Free Online Proof before printing, and upload artwork as PDF, JPG, or PNG.

Standard turnaround is 3 business days, which keeps the price lowest. When a show sneaks up, you can move to 2-day, Next-Day, or Same-Day production, and order by the cutoff to have a same-day job leave the New York plant that afternoon. 99.8% of 4OVER4 orders arrive on time and 82% ship early, so a firm booth date is not a gamble. Need it in a hurry? Our Same Day Printing keeps you covered.

Before it prints, choose Straight To Production to save a step, or request a Free Online Proof to check your layout first. Upload your artwork as a print-ready PDF, JPG, or PNG.

When Do You Order Replacement SEG Fabric?

SEG fabric is the graphic you order when you already own a frame or light box and want to change the message. It works for seasonal campaign swaps, refreshed trade-show branding, and spare graphics kept on hand. Because it is cut to any size and made for non-lit or backlit frames, it fits the display system you already run.

The whole point of a silicone edge graphic system is that the fabric is interchangeable. You buy the frame or light box once, then order fresh SEG fabric whenever the campaign, the season, or the branding changes, and the old panel rolls down to almost nothing for storage. Retailers swap in a new hero product, exhibitors refresh a booth between shows, and offices update a lobby feature without touching the hardware. Order it in any size to match the frame you own, pick non-lit or backlit to match the lighting, and a new face snaps in wrinkle-free.

How to Install and Wash SEG Fabric

Install it in one pass. With the frame assembled, start at one corner and press the keder into the channel with your thumb, then work outward along both edges from that corner rather than jumping around the frame. Leave the final corner until last, because the last stretch is where the tension comes from. If a wrinkle shows in the middle of the face, pull the keder back out of the groove for a foot or so on the nearest edge and re-seat it, instead of tugging on the printed fabric.

For cleaning, treat it as printed tension polyester. Dust and light marks come off with a damp cloth and mild soap, and a face that has been rolled or folded for storage will normally pull its own creases out once it is back in the frame under tension, which is one of the reasons the format travels well. Before putting a graphic through a washing machine, check with us about the specific fabric on your order, because a hot cycle and a spin can distort the sewn keder edge, and the keder is the one part that has to fit the channel exactly.

See the Rest of Our Displays

SEG fabric is one stop in a much larger lineup, and you can scan the full print product range any time. If a complete frame, a lit light box, or a packable popup would serve you better, the rest of the family is one tap away on the SEG Displays page. Each option shows its own starting price and links straight to its product page, so finding the right fit takes seconds.

Print Your SEG Fabric Today

At 4OVER4.COM, quality comes first, and it is backed by a satisfaction guarantee and 25+ years of printing since 1999. Whatever frame it goes into, non-lit or backlit, this SEG fabric is built to snap in wrinkle-free and hold color show after show. Need it before a launch or an exhibition? Our Same-Day production keeps you covered. Print your SEG fabric today.