Curve Tube Displays
See Curve Tube Displays in action
Watch a curve tube display go up in 1 minute 46 seconds: a push-fit frame, 8.8oz fabric in 6, 8 or 10 ft widths, one or two printed sides, and an optional LED kit.
- From $548.09 for one unit, with the per-unit price sliding to $456.81 each on a run of 10 displays.
- 3 widths: 6 ft, 8 ft, and 10 ft across the curve, plus custom sizing up to 120 by 89 inches to fit any booth.
- 8.8oz tension fabric, dye-sublimated for no glare, printed single sided against a wall or double sided when the curve shows both ways.
- Soft canvas bag included, tool-free push-fit frame, and an optional 2 LED spotlight kit to light the graphic.
- 4 business day standard turnaround with 3-day, 2-day and next-day rush, rated 5.0 out of 5 across 60 reviews.
Curve the Wall and the Aisle Looks Your Way
That softly bowed wall you have seen behind almost every expo booth is a curve tube display, and setup is the whole point. Push-fit tubes click into an arc, then an 8.8oz tension fabric skin pulls over the frame like a pillowcase and closes at the base, no poles to thread and no tools to lose. The gentle curve wraps slightly around your booth so your brand reads from the aisle at an angle, not only head-on. One unit starts at $548.09 and carries a perfect 5.0 out of 5 across 60 reviews.
One person can stand up a full booth wall in minutes, and when the show closes the frame breaks down and drops into the soft canvas bag it arrived in. Straight walls, pop-ups and counters are on Displays Printing if the booth needs more than one piece.
Most exhibitors buy one frame. A team running booths in several cities at once orders a set, and ten units bring each display down by more than $90.
What Is a Curve Tube Display
A curve tube display is a portable trade show backdrop built from a lightweight tube frame that bows into a gentle curve, wrapped in a printed 8.8oz tension fabric graphic. People reach for one when they need a booth wall that ships small, sets up without tools, and reads clearly from across a hall: trade show backdrops, expo booth walls, conference and speaker stages, retail activations, and office lobby branding. Because the frame is reusable and the fabric skin swaps out, plenty of teams keep one frame and reprint the graphic for each new campaign. If you want the flat version of the same build, the Straight Tube Display uses the same fabric-over-frame approach in a straight wall.
What Size Should a Curve Tube Display Be
Measure the back of your booth before you pick a width. The 6 ft wall packs smallest and fits a small booth, a spot beside a table, or a retail corner, the 8 ft gives more presence, and the 10 ft fills the back wall of a standard 10 by 10 space. For a height or width in between, set a custom size up to 120 by 89 inches. The three widths and both printing options are listed below as you will order them. For an even bigger booth wall, the Pop Up Displays scale up from here.
Curve Tube Display Specs
The numbers a booth planner needs before committing floor space:
| Spec | Detail |
|---|---|
| Standard widths | 6 ft, 8 ft and 10 ft measured across the curve |
| Maximum custom size | 120 inches wide by 89 inches high, made to order |
| Graphic material | 8.8oz tension fabric, dye-sublimated so the surface does not glare under booth lighting |
| Print sides | Single sided against a wall, double sided when the aisle sees both faces of the curve |
| Frame | Tool-free push-fit tube frame that assembles into the arc by hand |
| Included | Soft canvas carry bag with every display |
| Option | 2 LED spotlight kit to light the graphic on the stand |
| Turnaround | 4 business day standard, with 3-day, 2-day and next-day rush |
| Price | From $548.09 for one unit, sliding to $456.81 each on a run of 10 |
Two planning notes. Because the wall is curved, it eats less booth width than its stated size suggests at the front and more at the back, so measure the chord you have available rather than the arc. And a double sided print is the right call for an island booth or a corner stand, where people walk past the back of the display as often as the front.
What Material Is It Printed On
The graphic is dye-sublimated into 8.8oz tension fabric, a stretch polyester that pulls taut over the frame with no wrinkles and no glare. Because the color is baked into the weave rather than sitting on top, it will not crack or peel, it packs down soft without a permanent crease, and it reads matte under bright hall lighting instead of throwing glare back at the aisle. Against a wall, a single sided print is enough; in an island booth, where people pass behind the curve, the double sided print carries your brand on the back as well. The tube family also includes the Fabric Tube Displays if you want to compare builds.
If your designer builds the graphic, start from the blank curve tube display template, made at the real graphic size with the bleed and safe margin already drawn in, so your design never crowds the edge. Grab it below, drop your art in, and upload.
Press-Ready Blank Templates
Fabric behaves differently from a rigid panel in transit, and in your favor. Fold it into the bag rather than rolling it around something hard; fold lines that appear in the case relax out once the skin is stretched over the frame and the tension comes on, which is a large part of why fabric displays travel better than banner vinyl. What does not recover is a hard crease pressed under something heavy for a week, so do not store the bag at the bottom of a crate.
For show floor dust and handling marks, spot clean with cool water and a mild detergent, dab rather than scrub, and let it air dry fully before it goes back in the bag. Never put a hot iron on a dye-sublimated fabric face.
How Much Does a Curve Tube Display Cost
A curve tube display starts at $548.09 for one unit, and the per-unit price keeps dropping as you order more: 3 units run $1,404.83, 5 run $2,338.45, and 10 units land at $4,568.14, which works out to $456.81 each. Count the booths you will run in the same week, set the slider below to that number, and read the total and the cost of each unit.
Wally curves the wall so the aisle looks your way
A $548.09 tension fabric backdrop one person sets up without tools.
A curve tube display starts at $548.09 and snaps together without tools. The 8.8oz fabric graphic pulls over a curved frame, packs into the included soft canvas bag, and stands up in minutes. Pick a 6, 8, or 10 ft width and Wally gets your booth wall show-ready.
What Is Included With Each Display
The price covers more than the print. Each order ships with the full push-fit tube frame and a padded soft canvas bag, so the display travels as one carry-sized bundle instead of a crate. For a dim convention hall, the 2 LED spotlight kit clips to the top of the frame and lights the graphic from above. Before anything prints, you decide how careful to be: send it Straight to Production to save a step, or request a Free Online Proof to check the layout and color first. That proof is a no-cost catch for a typo before it becomes 10 ft tall.
Assembly and Graphic Replacement
Two people, no tools, no instructions to lose. The order on the show floor:
- Lay the tubes out. Take the frame sections out of the canvas bag and spread them on the floor in the shape of the arc, not in a pile.
- Push the frame together. The tubes push-fit into each other by hand and hold, which is why there is nothing to thread and no fixing to drop under a table.
- Stand it up. One person at each end, lift the assembled arc upright and set the feet.
- Pull the graphic over. The fabric skin goes over the top of the frame like a pillowcase and is drawn down both sides. Work it down evenly rather than pulling one corner all the way first.
- Close it at the base. The skin closes underneath, which puts the tension on and pulls the face flat.
Breakdown is the same list backwards, and it is faster. Everything goes back in the same soft canvas bag it arrived in.
The frame outlives the message. When the campaign, the logo or the tagline changes, order a replacement graphic to the same width and it goes on the frame you already own, which is the difference between a print cost and a hardware cost. Practically, that means keeping the old skin is worth it: two graphics on one frame gives you a product show face and a recruiting face without buying a second display.
How Does It Compare to the Rest of the Range
A curve tube display is the pick for a booth wall that ships light and reads from an angle. If you are weighing a straight wall, a different tube build, or a full pop-up, the chart below lines up the curve tube display against its closest siblings so you can compare the starting price on each before you choose.
See How a Finished Display Lands
The gallery below shows graphics our customers printed in-house, across sizes and single and double sided builds. Look at where the logo sits on the curve, since the middle of the arc is the part the aisle sees first. Tap any print to see it larger.
Real Banner Stands Our Customers Printed
How Fast Can You Get One
Curve tube displays print on a 4 business day standard turnaround, and when a show date sneaks up you can move that to 3-day, 2-day, or next-day rush. Each step buys back time for a set amount on top of the base price, so you only pay for speed when you actually need it. Compare every turnaround tier in the configurator and see exactly what the rush adds before you pick. Our guide to next day displays covers the rush case in detail.
See the Rest of Our Displays
A curve tube display is one stop in a much larger lineup, and you can scan the full print product range any time. If a straight wall, a different tube build, or a heavier pop-up would serve you better, each option shows its own starting price and links straight to its product page.
More From Displays - Professional Quality
The full trade show displays range covers the rest of the booth, the straight backdrops, the retractables and the counters that sit in front of them. If the wall is being hung rather than stood up, or the message needs to work outdoors at the entrance as well as inside the hall, vinyl banners do that job for a fraction of the hardware. To shop by event instead, see our trade show displays for every booth size.
Print Your Curve Tube Display Today
At 4OVER4.COM, quality comes first, and it is backed by five guarantees and 25+ years of printing since 1999. Whatever width and printing option you pick, this curve tube display is built to set up fast, read from the aisle, and travel show after show. Print your curve tube display today.
Questions about Curve Tube Displays? See answers
